CONSERVER®

CONSERVER®

The CONSERVER® is an appareil that was created for the vacuum preservation of paper materials but, its versatility allows using it with different kind of objects. In fact it is used also for the preservation of wooden materials or metal objects in order to prevent oxidative processes. For over 20 years the CONSERVER® has been the most popular equipment in Archives and Libraries.

Contact now
Feature
Technical data

Compared to others machineries on the market, the CONSERVER® has been designed with high engineering standards and, at the same time, maintaining an extreme simplicity of use.

The first distinction that must be noted between the CONSERVER® and other vacuum machinery is the vacuum rate that can be applied to objects. Other apparatus , called “bell-shaped”, which come from the world of food preservation, tend to reach the maximum vacuum in a fraction of a second, and it may imply the risk of damaging treated objects. The CONSERVER® reaches the required vacuum level slowly, or it is also possible to set a manual adjustment in order to reach the desired vacuum level gradually.

Another great advantage of the CONSERVER®, which distinguishes it from other similar products, is the possibility of using envelopes of different sizes. In other words, the CONSERVER® allows choosing the optimal size of the envelope; in fact it is possible to choose between different formats that depend just on the size or volume of the object.

A very popular feature of the CONSERVER is the size of the welding bars that are very wide, it means that it is possible to create envelopes with sealable side up to 53 cm and this is very important for the packaging of large objects.

The convenience of the CONSERVER® does not only consist in the purchase price, but also in the great economy of its using and its low maintenance. It is easy to verify this, for example, by just considering the type of used pumps, that are dry, with long maintenance time and that do not require either the replacement or checking the level of the lubricating oil.

Technical Data of CONSERVER®

STANDARD POWER SPECIAL
Maximum width of the envelope on the open side 52.5 cm 52.5 cm Customizable
Maximum length of the envelope No limit
Support surface for the artwork (without auxiliary plane) 60 x 22 cm 60 x 22 cm Customizable
Removable auxiliary support surface (extension) 60 x 66 cm 60 x 66 cm Customizable
Sealing Thermal, thermo-controlled, 6 mm width
Sealing bar Teflon-coated, manual handling and automatic operation
Vacuum Chamber Useful surface 52.5 x 7.5 cm, with manual closure Useful surface 52.5 x 7.5 cm, with manual closure Customizable
Minimum pressure 110 mbar 10 mbar 110 mbar/10 mbar
Maximum suction flow 32 litres of air per minute

@ 50Hz

60 litres of air per minute

@ 50Hz

32/60 litres  of air per minute
Supply voltage 220/230 V. 50 Hz
Voltage of the internal electrical system 12V
Power consumption Suction 200W max

Welding 160 W max

Suction 270W max

Welding 160 W max

Depending on the chosen option
User Interface – Led buttons

– Handle for the vacuum regulation

– Control lights

Display Alphanumeric

20×4 characters

Blue backlit led.

Alphanumeric

20×4 characters

Blue backlit led.

Alphanumeric

20×4 characters

Customisable RGB colour backlit led.

Vacuum suction Controlled and monitored electronically
Instrumentation – Precision vacuum gauge

– Welding time on the graphic bar

– On display user guide with user interaction

Activations – Complete cycle

– Welding cycle only

– Reset

– Manual vacuum chamber

– Manual vacuum regulation

– Manual handling sealing and automatic activation

Management and 
control devices
Microprocessor technology for management of work phases, control actuators, Error Check, Safety
Frame and Chassis Neutral anodized aluminum
 CE Mark According to Eu Directive 765/2008
Weight 23 Kg, including auxiliary bolster 24.6 Kg, including auxiliary bolster Depending on the choice
Dimensions (H x W x D) (excluding auxiliary bolster) 60 x 50 x 33 cm 60 x 50 x 33 cm Depending on the request